Call a Water Tank Expert Now... 1300 737 210

Slimline Rainwater Tank 5,000 Litre

PRICE - AUD

$1565.00

+ DELIVERY FEE


• Product Code: ES5000

Product code: ES5000

5,000 Litre Slimline ES - 222cm (H) 322cm (L) 96cm (W)

This is the biggest Slimline tank we manufacture. At less than 1m in width, it is still able to fit into smaller spaces.

Specifications:

  • 222cm (H)
  • 322cm (L)
  • 96cm (W)

As with all of our tanks, included with the tank is a leaf strainer, ball valve and overflow connection. Please see tank colours available on our Colour Matching Guide below.

100% Polyethylene food grade material Your assurance of safety
Certified AS/NZS 4766:2006 Your assurance of quality

Download PDF

Colour Matching Guide

Water Tank & Accessories Warranty

  1. The Enviro Water Tanks warranty will be for a period of 20 years subject to the conditions herein as specified.
  2. Enviro Water Tanks guarantees that its tanks are free of defects from any faulty manufacturing and that all its tanks are approved by a certified structural engineer for a minimum tensile strength at yield of the material at 18mpa at a service temperature of 23 degrees Celsius.
  3. Enviro Water Tanks warrants its Polyethylene tanks will perform the function for which they are designed for, namely to hold potable water at ambient rainwater temperature.
  4. The warranty will start from the date of purchase. The original receipt must be kept as proof of purchase to validate the warranty. The warranty is not transferable.
  5. Should the tank fail to perform its function for which it is made due to a manufacturing fault during the 20 year warranty period, Enviro Water Tanks at its discretion may repair or replace the tank at no cost to the customer.
  6. This warranty will be null and void if damage is caused by acts of God such as floods, earthquakes, landslides, ozone depletion or natural disasters.
  7. The purchaser is responsible to secure the tank so that the tank cannot move or fall over whether the tank is empty or contains water. Enviro Water Tanks accepts no responsibility for any damage or injury caused by a tank that has not been secured properly.
  8. The warranty is void if any person has walked on or placed any weight or load to the top of the tank.
  9. Enviro Water Tanks retains ownership of all goods sold until full payment has been made by the purchaser.
  10. Any defect or fault that has been brought to the attention of the purchaser prior to purchase will not be covered under this warranty.
  11. Once goods have been delivered to the site the purchaser is responsible for any damage or theft that may occur.
  12. Over an extended period of time degradation or weathering may occur and the effects thereof are expected by current industry standards so are not covered by this warranty.
  13. This warranty will be null and void if:
    - The tank is not installed in accordance with the company's installation procedures.
    - The tank has been subjected to any form of misuse or any form of willful or accidental damage.
    - The tank has been used for any other means than the collection of potable water.
  14. The purchaser is responsible for which (product) tank they choose and for suitability of the purpose they wish to use it for. This warranty does not apply where the purchaser installs or uses a tank for a purpose for which it was not fit.
  15. Where any provisions of this warranty are inconsistent with the provisions of any statute, rule or regulation under the common law, that provision shall be treated as excised only to the extent of the inconsistency and leaving in so far as possible the balance of the provisions of this warranty unaffected.
  16. All liabilities, conditions, warranties and obligations of any kind (other than outlined in condition number 10) which are or may be imposed or implied to the contrary by any statute, rule or regulation, or under the common law and whether arising from the negligence of the company, its employees or otherwise are hereby excluded except to the extent that the company may be prevented from doing so by any statute, rule or regulation under the common law.
  17. All water tanks must be installed in a professional manner and in accordance with Enviro Water Tanks installation and site preparations otherwise the warranty will be null and void.
  18. The Purchaser is responsible to return goods (water tank) to the original place of purchase for any issue related to warranty so EWT can determine whether it is a warranty claim, and is so can repair or replace, the product (water tank) EWT will return the product to (water Tank) to the original place of purchase or retailer from where the purchaser if able to collect their goods (water tank) from.
  19. 25mm Brass outlet fittings are provided in EWT rainwater tanks, Any additional hole other than overflow. Holes that are drilled out will void the warranty unless EWT has given written permission to do so or EWT has agreed to install extra outlets to a maximum 50mm at the customer's request (this only applies to round tanks)
  20. All outlets are provided with a water tight brass fittings. There is no warranty on fittings that leak. It is the customers responsibility to make sure that the ball valves are not over tightened or brass outlets are not used to lift tanks. EWT does not provide warranty for ball valves or overflow fittings.

Installation and site preparation for an Enviro Water Tanks polyethylene water tank

  1. Ensure that the area chosen is stable original ground and not filling soil.
  2. All Enviro Water Tanks tanks must be on a level base of concrete 100mm thick with a minimum strength 25m.p.a. and one layer of F72 reinforcement.
  3. Concrete must extend a minimum of 30mm outside of the tank perimeter of the tank.
  4. Crusher dust may be used but must be a minimum of 75 mm thick, compacted and the outside edge must extend a minimum of 30mm outside of the tank's perimeter with edges concreted so the tank cannot be undermined.
  5. All tanks come complete with a ball valve, stainless steel mesh strainer and a tank overflow fitting.
  6. Enviro Water Tanks recommends a professional tank installer or plumber should install your tank.
  7. Polyethylene tanks will expand when filled. Allowance for expansion is required when plumbing work is carried out.
  8. Clean leaves & debris from strainer on a regular basis.

NB: we do not return tanks for incorrect size or colour.

Similar Products